• Easily used by ships maintenance staff right out of the box

  • Instant indication of condition for motor bearings, gears, compressors, slewing rings, hoists, winches...

  • Plan maintenance and have the spares available on time. Minimise off-hire and demurrage.
Quick Contact
CAPTCHA
This question is for testing whether you are a human visitor and to prevent automated spam submissions.
Image CAPTCHA
Enter the characters shown in the image.

Off-line Offshore Drilling Solutions

On-board provides additional testing local to the asset, allowing you to vet a sensor reading quickly and effectively or as a primary source of testing where sensors are not available or appropriate. To correlate / overlay the result you can forward a sample to an on-shore lab. However, you may find sufficient information is available upon testing ‘locally’, such that you can take immediate action to avert trauma while still sending the sample out for additional test parameters and recommendations.


Diesel Engines, Oil Condition: Common important tests are available via Parker Kittiwake Oil Test Centres (OTC).


Gearboxes, Oil Condition: Common important tests are available via Parker Kittiwake Oil Test Centres (OTC):


Hydraulics, Oil Condition: Common important tests are available via Parker Kittiwake Oil Test Centres (OTC):


Special Consideration

  • Salt water contamination from inclement weather can be a problem for some sunps, particularly exposed gearsets on platforms. You will need to handle lubricants with good care, as well as ensure that breathers and other ingress points are properly serviced and controlled. If necessary, salt water identification is available at Tier 2 level.

Your Industry

Latest News

Parker Kittiwake Launches New CAT Fines Test Kit
Test kit detects catalytic fines to prevent irreparable damage to fuel pumps, injectors, piston ring... Read More...
Switching Fuel Oil and the Risk of Loss of Propulsion
Nearly nine months have passed since the 0.1% sulphur limit for marine fuels in designated Emissions... Read More...
Measuring Ferrous Wear: the FWM vs. the Analex fdMplus
When it comes to detecting and analysing machine wear, testing for ferrous density – the prese... Read More...